151 lines
6.6 KiB
Markdown
151 lines
6.6 KiB
Markdown
Copyright (C) 2015 CentraleSupélec
|
||
All rights reserved
|
||
|
||
La documentation originale est en français : LISEZMOI.md. La documentation ci-dessous n’est qu’une traduction.
|
||
|
||
The original manual is the french "LISEZMOI.md", you read below a translation of this file.
|
||
|
||
# Installation #
|
||
|
||
This package was developped with the Indigo version of ROS.
|
||
|
||
## Dependencies installation ##
|
||
```
|
||
#!sh
|
||
sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu trusty main" > /etc/apt/sources.list.d/ros-latest.list'
|
||
wget https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -O - | sudo apt-key add -
|
||
sudo apt-get update
|
||
sudo apt-get install ros-indigo-desktop-full ros-indigo-freenect-stack ros-indigo-ardrone-autonomy libncursesw5-dev
|
||
```
|
||
## Package installation ##
|
||
|
||
### Catkin workspace creation ###
|
||
|
||
For instance :
|
||
|
||
```
|
||
#!sh
|
||
source /opt/ros/indigo/setup.bash
|
||
mkdir -p ~/hand_control_ws/src
|
||
cd ~/hand_control_ws/src
|
||
catkin_init_workspace
|
||
```
|
||
|
||
### Code location ###
|
||
|
||
If necessary, rename the folder with the file named `hand_control`, and move it in `~/hand_control_ws/src/` or in the subfolder `src` of your catkin workspace.
|
||
|
||
## Compilation ##
|
||
|
||
You're now able to compile :
|
||
|
||
```
|
||
#!sh
|
||
cd ~/hand_control_ws # or your catkin workspace
|
||
catkin_make
|
||
```
|
||
|
||
Then you can run the following commands to be able to use the ROS commands. If necessary replace "hand_control_ws" by the name of your catkin workspace.
|
||
|
||
```
|
||
#!sh
|
||
source /opt/ros/indigo/setup.bash
|
||
source ~/hand_control_ws/devel/setup.bash
|
||
echo "source /opt/ros/indigo/setup.bash" >> ~/.bashrc
|
||
echo "source ~/hand_control_ws/devel/setup.bash" >> ~/.bashrc
|
||
```
|
||
|
||
# Use #
|
||
|
||
## Connection and setting up of the Kinect ##
|
||
|
||
1. Connect the Kinect (under voltage) to the computer via USB ;
|
||
2. Put the Kinect on the ground, pointed toward the roof ; be aware that your arm must be perpendicular to the Kinect in order to control the drone properly ;
|
||
2. Launch the "launchfile" kinect_commander.launch : `roslaunch hand_control kinect_commander.launch` ;
|
||
3. Check the drone parameters :
|
||
- launch rviz : `rosrun rqt_rviz rqt_rviz`
|
||
- display the output of the filtering (topic : `/filter/output` ; frame : `/camera_depth_optical_frame`) and locate the hand ;
|
||
- launch rqt_reconfigure : `rosrun rqt_reconfigure rqt_reconfigure` in order to :
|
||
- change the filter parameters until you only see the points of the hand/glove/panel on rviz (see above).
|
||
- change the parameter `neutral_alt` of the node `commander` to the wanted height (in meters), correponding to the height of the hand for which the height of the drone will be stable.
|
||
|
||
### Parameters of the filter ###
|
||
|
||
The parameters of the filter (that can be changed thanks to `dynamic_reconfigure` and in particular `rqt_reconfigure`) are :
|
||
|
||
* `z_max` : in meters, maximal height of the hand. It must be lower than the height of the roof.
|
||
* for a glove or a *colored* panel (green, blue, etc.), we generaly have :
|
||
- `hue` : for example 220 (sky blue) or 150 (green) or 0 (pink/red) ;
|
||
- `delta_hue` : between 10 and 20 ;
|
||
- `sat/val_min` : 0.0 ;
|
||
- `sat/val_max` : 1.0 ;
|
||
* for a *black* glove :
|
||
- `hue` : 0 ;
|
||
- `delta_hue` : 180 ;
|
||
- `sat_min` : 0.0 ;
|
||
- `sat_max` : 1.0 ;
|
||
- `val_min` : 0.0 ;
|
||
- `val_max` : 0.3 (at your convenience);
|
||
|
||
### Other parameters ###
|
||
|
||
Always with `rqt_reconfigure`, but with the `estimator` node :
|
||
- `reverse` : swap x and y, the axes of the Kinect (default : false, ie. unchecked)
|
||
- `reverse_angle` : change the angle choosen for the compute of the angle of the hand (default : false, ie. unchecked)
|
||
|
||
## Connection to the drone and steering ##
|
||
|
||
* Connect the computer to the wifi network of the drone ;
|
||
* Launch the "launchfile" ardrone.launch : `roslaunch hand_control ardrone.launch` ;
|
||
* Taking off :
|
||
- whether `rostopic pub /ardrone/takeoff std_msgs/Empty` ;
|
||
- or launch the node keyboard_cmd : `rosrun hand_control keyboard_cmd` and use *t* on the keyboard.
|
||
* Landing :
|
||
- whether `rostopic pub /ardrone/land std_msgs/Empty` ;
|
||
- or, launch the node keyboard_cmd, and use *b* on the keyboard.
|
||
* Emergency stop :
|
||
- whether `rostopic pub /ardrone/reset std_msgs/Empty` ;
|
||
- or, launch the node keyboard_cmd, and use *g* on the keyboard.
|
||
|
||
### Hand steering ###
|
||
|
||
* Forward/backward & side translations : hand tilt ;
|
||
* Rotate (around the vertical axis z) : angle of the hand with the the axis parallel to the ground and perpendicular to the kinect ;
|
||
* go up/go down : hand height.
|
||
|
||
### Options and parameters of the command ###
|
||
|
||
To edit the options of the command, change (if not already) `rosrun rqt_reconfigure rqt_reconfigure` :
|
||
|
||
- `max_curvature` : not used for the moment ;
|
||
- `x/y/z/theta_minimal_deviation` : thresholds required above which the movement of the hand is not taken into account. If all are 0.0, the drone responds linearly.
|
||
* x, y : between 0. and 1. (corresponding to the x and y of the normal to the plane);
|
||
* z : in meters ;
|
||
* theta : in degrees.
|
||
- `neutral_alt` : height of the hand for the immobility of the height of the drone ;
|
||
- `min_points_number` : minimal number of points (for the point cloud used for the regression) necessary in order to send a command to the drone ;
|
||
- `angle/x/y/z_vel` : proportionality coefficients to apply to the inputs in order to establish the command sent to the drone. Increase it will increase the speed of the drone ;
|
||
- `up_fact` : proportionality coefficients to apply to the command that increases the height of the drone, compared to the equivalent command to reduce it (in order to correct the effect of gravity).
|
||
|
||
### About `keyboard_cmd` ###
|
||
|
||
It allows you to publish commands on the topic `cmd_vel` and so to steer the drone. It is scheduled for azerty keyboards. To launch it, run :
|
||
|
||
```
|
||
#!sh
|
||
rosrun hand_control keyboard_cmd
|
||
```
|
||
|
||
To increase/decrease the speed (there is an explication on the controlpanel) : a,z,e,r and w,x,c,v
|
||
|
||
The informations of the drone are updated when a key is pressed.
|
||
|
||
To quit : CTRL+C and press "Enter" to return to the console.
|
||
|
||
# Problems - Possible improvements #
|
||
|
||
- If commands are published on `cmd_vel` (from the Kinect for instance) after the launch of `ardrone.launch` and before the takeoff, then, after the takeoff, the drone seems to obey to commands published before the takeoff.
|
||
|
||
- As written above, the display of navigation data on `keyboard_cmd` is only updated when a key is pressed, and can therefore stay fixed when the keyboard commander is not used.
|
||
|
||
- The takeoff/landing is not controllable with the hand. The keyboard must be used (`keyboard_cmd` or `rostopic pub`) instead. We can correct this by creating two new thresholds, minimal and maximal, for the hand height : a very low hand would make the drone land and a very high hand would make the drone take off.
|